An investigation into the response of a modular pontoon system to wave loading

Graham Gathergood

Abstract


This project involves investigating the response of a modular pontoon system when put under wave loading. In addition, this report also hopes to establish a point at which the movement of a pontoon due to waves will cause the pontoon to be considered unsuitable for use. This research draws upon previous work conducted within the field and expands upon it using physical modelling. In this case the modelling comprises of a modular pontoon being subjected to waves with a range of frequencies and amplitudes. Thorough analysis of results obtained from this determined that under higher frequency waves the movement response of a modular pontoon is less than that when under low frequency waves. In addition, a recommended value for the slope of a modular pontoon of 1 in 7.5m was defined as the steepest allowable gradient for a modular pontoon before it should be considered unsafe for use

Full Text:

PDF

References


Abul-Azm, A.G. and Gesraha, M.R. (2000) ‘Approximation to the hydrodynamics of floating pontoons under oblique waves’, Ocean Engineering, 27(4), pp. 365–384. doi: 10.1016/s0029-8018(98)00057-2.

Australian Standards (2001) AS 3962—2001 Guidelines for design of marinas. Sydney: Standards Australia International.

British Standards Institution (2007) BS 6349-8:2007 Maritime structures. Code of practice for the design of Ro-Ro ramps, linkspans and walkways. London: British Standards Institution.

Buckingham, E. (1915) ‘The Principle of Similitude’, Nature, 96(2406), pp. 396–397. doi: 10.1038/096396d0.

Chanson, H. (1999) Hydraulics of open channel flow: An introduction: Basic principles, sediment motion, hydraulic Modelling, design of hydraulic structures. London: Butterworth-Heinemann.

Chanson, H. (2004) Environmental hydraulics for open channel flows. Oxford: Elsevier Butterworth-Heinemann.

GeoData Institute (2016) Channel coastal observatory. Available at: http://www.channelcoast.org/ (Accessed: 26 April 2016).

Gesraha, M.R. (2004) ‘An eigenfunction expansion solution for extremely flexible floating pontoons in oblique waves’, Applied Ocean Research, 26(5), pp. 171–182. doi: 10.1016/j.apor.2005.05.002.

Gao, R.P., Wang, C.M. and Koh, C.G. (2013) ‘Reducing hydroelastic response of pontoon-type very large floating structures using flexible connector and gill cells’, Engineering Structures, 52, pp. 372–383. doi: 10.1016/j.engstruct.2013.03.002.

Gottschalk, L. and Krasovskaia, I. (2002) ‘L-moment estimation using annual maximum (AM) and peak over threshold (POT) series in regional analysis of flood frequencies’, Norsk Geografisk Tidsskrift - Norwegian Journal of Geography, 56(2), pp. 179–187. doi: 10.1080/002919502760056512.

Hamill, L. (2011) Understanding hydraulics. 3rd edn. Basingstoke: Palgrave Macmillan.

Hughes, S.A. (1993) Physical models and laboratory techniques in coastal engineering. Singapore: World Scientific Publishing Co Pte.

Iglesias, G. (2016) Long Term Wave Statistics (A statistical study of rare events)[PowerPoint presentation]. COUE318: Coastal Engineering Design and Analysis. Plymouth University.

Kamphuis, J.W. (2010) Introduction to coastal engineering and management. 2nd edn. Singapore: World Scientific Publishing Company. In-line Citation: (Kamphuis, 2000)

Kan, W. (no date) Motion in the sea -- waves. Available at: http://www.marine.tmd.go.th/marinemet_html/lect18.html (Accessed: 14 February 2016).

Le Mehaute, B. and Webb, L.M., 1964. Periodic gravity waves over a gentle slope at a third order of approximation. Coastal Engineering Proceedings,1(9).

Loukogeorgaki, E., Michailides, C. and Angelides, D.C. (2012) ‘Hydroelastic analysis of a flexible mat-shaped floating breakwater under oblique wave action’, Journal of Fluids and Structures, 31, pp. 103–124. doi: 10.1016/j.jfluidstructs.2012.02.011.

Michailides, C., Loukogeorgaki, E. and Angelides, D.C. (2013) ‘Response analysis and optimum configuration of a modular floating structure with flexible connectors’, Applied Ocean Research, 43, pp. 112–130. doi: 10.1016/j.apor.2013.07.007.

Plastics technical properties (no date) Available at: http://www.dotmar.com.au/density.html (Accessed: 16 January 2016).

Reeve, D., Chadwick, A. and Fleming, C. (2011) Coastal engineering: Processes, theory and design practice. 2nd edn. New York: Taylor & Francis.

Shibayama, T. (2008) Coastal processes: Concepts in coastal engineering and their application to Multifarious environment. Singapore: World Scientific Publishing Co Pte.

Silvester, R. (1974) Coastal engineering, Vol. 1: Generation, propagation and influence of waves. United Kingdom: Elsevier Science.

Schwartz, M.L. (1984) The encyclopedia of beaches and coastal environments. Edited by Maurice L. Schwartz. Netherlands: Kluwer Academic Publishers.

Versadock: Modular Docking solutions (2016) Available at: http://versadock.com/ (Accessed: 12 November 2016).

Wiegel, R.L. (1964) Oceanographical Engineering. Prentice-Hall, University of Michigan.

Wood densities (no date) Available at: http://www.engineeringtoolbox.com/wood-density-d_40.html (Accessed: 15 January 2016).


Refbacks

  • There are currently no refbacks.


Creative Commons License 
This work is licensed under a Creative Commons Attribution 3.0 License

ISSN 1754-2383 [Online] ©University of Plymouth